The Complete Stonebridge (STB) Structural Detailing Masterclass

About Course

What if I told you that you could take your raw structural designs from ProtaStructure, STAAD.Pro, or Orion… and turn them into professional, site-ready construction documents in a fraction of the time it takes now?

No more endless hours of repetitive AutoCAD detailing. No more copying, pasting, or manually adjusting bars. No more mistakes creeping into your drawings that delay construction or frustrate contractors.

With the Stonebridge Structural Detailing Template, you can streamline your entire reinforced concrete detailing workflow, reducing your workload by over 80%.

Here’s how it works for you:

Automated Efficiency: Stonebridge converts raw structural outputs into fully detailed drawings automatically. You just review, tweak, and approve.
Standardized & Professional: Every drawing meets professional, site-ready standards — contractors, site engineers, and clients will notice the difference.
Seamless Integration: Works directly with ProtaStructure, STAAD.Pro, and Orion — no complicated conversions or extra software needed.
Error Reduction: Automation minimizes human errors, saving you rework and headaches.

Imagine finishing a week’s worth of detailing in a single day. Imagine finally having time to focus on higher-level design work, client communication, or growing your business — instead of being trapped in AutoCAD.

That’s exactly what my course, “Structural Detailing with Stonebridge Template,” teaches you.

In this course, you will learn:

How to install and set up the Stonebridge Template for your projects.
How to convert raw structural outputs from any supported software into fully detailed drawings.
Tips and tricks to optimize detailing, so every drawing is consistent, professional, and site-ready.
Advanced workflows that save time while increasing accuracy.

By the end of this course, you’ll not only be faster, but your drawings will look more professional, impress your clients, and reduce the risk of costly on-site mistakes.

Here’s the bottom line:

If you’re spending countless hours manually detailing reinforced concrete, you’re wasting your time — and your clients’ money. This course gives you the shortcut to efficiency, professionalism, and peace of mind.

Enroll today and start transforming your workflow with the Stonebridge Structural Detailing Template. Don’t let another project drag on because of manual detailing.

Click below to secure your spot and start saving 80% of your detailing time.

Enroll Now – Transform Your Detailing Workflow

Time is money. Your efficiency is your edge. Don’t let outdated detailing slow you down.

You will begin by setting up your Stonebridge (STB) detailing environment the correct way.
You will learn how professional structural offices organize their detailing workspace so you can work faster, cleaner, and more efficiently from day one.
You will explore the pre-built foundation templates within STB and learn how to use them efficiently.
You will learn how to interpret the structural design and translate it into clear, accurate detailing drawings for the first floor structure.
You will learn how to produce general arrangement drawings for columns and foundations.
You will understand how to organize structural information so it is easy to read, professional, and ready for construction use.
You will expand your foundation detailing skills by working with raft foundations and wide strip foundations.
You will begin working with pile foundation systems, which are commonly used for deeper foundations.

Course Content

WEEK 1 — Course Orientation & STB Environment Setup
By the end of this module you should be able to setup the Stonebridge environment correctly and confidently navigate the detailing template. Recommended Timeframe ⏱ 3–4 days

General course introduction

08:11
How to locate the Stonebridge Template on your system

02:56
STB template interface overview

05:15
STB template interface overview (continued)

03:20

WEEK 2 — Industry Standards & Pad Foundation Fundamentals
By the end of this module you will understand industry-acceptable detailing standards and can read and interpret pad foundation drawings. Recommended Timeframe ⏱ 4–5 days

WEEK 3 — Exploring STB Foundation Templates
Recommended Timeframe ⏱ 4–5 days Learning Objective By the end of this module youshould be able to select the correct STB template based on structural system.

WEEK 4 — Importing Structural Design Drawings (Workflow Integration)
Recommended Timeframe ⏱ 3–4 days By the end of this module you should be able import structural design drawings cleanly into the STB detailing environment

WEEK 5 — First Floor Beam & Column Layout (Core Skill)
Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

WEEK 6 — First Floor Beam & Column Layout (Core Skill) Continued
Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

WEEK 7 — Roof Framing & Column Continuity
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should understand vertical load continuity and correct layer management.

WEEK 8 — Slab Detailing (Bottom Bars, Top Bars & Callouts)
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 9 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 10 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 11 — Column & Foundation General Layouts
Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

WEEK 12 — Column & Foundation General Layouts (Continued)
Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

WEEK 13 — Presentation & Printing (Professional Output)
Recommended Timeframe: ⏱ 3–4 days Learning Objective: By the end od this module you should be able to present structural drawings professionally for approval or construction.

WEEK 14 — Pile Foundation Detailing
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 15 — Pile Foundation Detailing (Continued)
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 16 — Pile Foundation Detailing (Continued)
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 17 — Raft & Wide Strip Foundations
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should be able to understand alternative foundation systems and their detailing logic.

WEEK 18 — Raft & Wide Strip Foundations (Continued)
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should be able to understand alternative foundation systems and their detailing logic.

WEEK 19 — Slab Raft & Steel Template
Recommended Timeframe ⏱ 5–6 days Learning Objective By the end of this module you should be able to adapt STB workflow to complex structural systems.

Add this certificate to your resume to demonstrate your skills & increase your chances of getting noticed.

Student Ratings & Reviews

No Review Yet

About Course

What Will You Learn?

Course Content

WEEK 1 — Course Orientation & STB Environment Setup By the end of this module you should be able to setup the Stonebridge environment correctly and confidently navigate the detailing template. Recommended Timeframe ⏱ 3–4 days

General course introduction

How to locate the Stonebridge Template on your system

STB template interface overview

STB template interface overview (continued)

WEEK 2 — Industry Standards & Pad Foundation Fundamentals By the end of this module you will understand industry-acceptable detailing standards and can read and interpret pad foundation drawings. Recommended Timeframe ⏱ 4–5 days

Comparing Different Structural Working Drawings (industry standard)

Building on Pad Foundation

Building on Pad Foundation (continued)

WEEK 3 — Exploring STB Foundation Templates Recommended Timeframe ⏱ 4–5 days Learning Objective By the end of this module youshould be able to select the correct STB template based on structural system.

Pad Foundation Template

Pile Foundation Templates

Slab raft foundation Template

Beam Raft Foundation Template

Wide Strip Foundation Template

Steel template

External integrations (STAAD, Protastructure, etc.)

WEEK 4 — Importing Structural Design Drawings (Workflow Integration) Recommended Timeframe ⏱ 3–4 days By the end of this module you should be able import structural design drawings cleanly into the STB detailing environment

Opening ProtaStructure drawings

Pasting drawings into STB template

Assignment 1

WEEK 5 — First Floor Beam & Column Layout (Core Skill) Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

First Floor Beam And Column Layout Arrangement, And Storey Beams

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

WEEK 6 — First Floor Beam & Column Layout (Core Skill) Continued Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

First Floor Beam And Column Layout Arrangement, And Storey Beams

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

First Floor Beam And Column Layout Arrangement, And Storey Beams (Continued)

Assignment 2

WEEK 7 — Roof Framing & Column Continuity Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should understand vertical load continuity and correct layer management.

Roof Beam & Column Layout

Roof Beam & Column Layout (continued)

First Floor & Roof Column Arrangement

Layer Matching With STB Standards

Assignment 3

WEEK 8 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

Slab Detailing

Slab Detailing (continued)

Slab Detailing (continued)

Slab Detailing (continued)

WEEK 9 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

Slab Detailing (continued)

Slab Detailing (continued)

Slab Detailing (continued)

Slab Detailing (continued)

WEEK 10 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

Slab Detailing (continued)

Slab Detailing (continued)

Slab Detailing (continued)

Slab Detailing (continued)

Assignment 3

WEEK 11 — Column & Foundation General Layouts Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

Column Detailing

General Foundation Layouts

General Foundation Layouts (Continued)

General Foundation Layouts (Continued)

WEEK 12 — Column & Foundation General Layouts (Continued) Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

General Foundation Layouts (Continued)

General Foundation Layouts (Continued)

RC Pad Base Details

Assignment 4

WEEK 13 — Presentation & Printing (Professional Output) Recommended Timeframe: ⏱ 3–4 days Learning Objective: By the end od this module you should be able to present structural drawings professionally for approval or construction.

Presentation and Printing

Presentation and Printing (Continued)

Assignment 6

WEEK 14 — Pile Foundation Detailing Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

Pile Foundation Detailing

Pile Foundation Detailing (Continued)

Pile Foundation Detailing (Continued)

Pile Foundation Detailing (Continued)

WEEK 15 — Pile Foundation Detailing (Continued) Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

Pile Foundation Detailing (Continued)

Pile Foundation Detailing (Continued)

Pile Foundation Detailing (Continued)

WEEK 1 — Course Orientation & STB Environment Setup
By the end of this module you should be able to setup the Stonebridge environment correctly and confidently navigate the detailing template. Recommended Timeframe ⏱ 3–4 days

WEEK 2 — Industry Standards & Pad Foundation Fundamentals
By the end of this module you will understand industry-acceptable detailing standards and can read and interpret pad foundation drawings. Recommended Timeframe ⏱ 4–5 days

WEEK 3 — Exploring STB Foundation Templates
Recommended Timeframe ⏱ 4–5 days Learning Objective By the end of this module youshould be able to select the correct STB template based on structural system.

WEEK 4 — Importing Structural Design Drawings (Workflow Integration)
Recommended Timeframe ⏱ 3–4 days By the end of this module you should be able import structural design drawings cleanly into the STB detailing environment

WEEK 5 — First Floor Beam & Column Layout (Core Skill)
Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

WEEK 6 — First Floor Beam & Column Layout (Core Skill) Continued
Recommended Timeframe ⏱ 6–7 days By the end of this module you should be able to produce a complete first-floor beam and column layout using STB standards.

WEEK 7 — Roof Framing & Column Continuity
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should understand vertical load continuity and correct layer management.

WEEK 8 — Slab Detailing (Bottom Bars, Top Bars & Callouts)
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 9 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 10 — Slab Detailing (Bottom Bars, Top Bars & Callouts) Continued
Recommended Timeframe: ⏱ 6–7 days Learning Objective:By the the end of this module you can fully detail slabs with correct reinforcement notation.

WEEK 11 — Column & Foundation General Layouts
Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

WEEK 12 — Column & Foundation General Layouts (Continued)
Recommended Timeframe: ⏱ 4–5 days Learning Objective: By the end of this module you should be able to produce construction-ready foundation layouts.

WEEK 13 — Presentation & Printing (Professional Output)
Recommended Timeframe: ⏱ 3–4 days Learning Objective: By the end od this module you should be able to present structural drawings professionally for approval or construction.

WEEK 14 — Pile Foundation Detailing
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 15 — Pile Foundation Detailing (Continued)
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 16 — Pile Foundation Detailing (Continued)
Recommended Timeframe :⏱ 5–6 days Learning Objective : By the end of this module you should be able to detail pile foundations end-to-end using STB.

WEEK 17 — Raft & Wide Strip Foundations
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should be able to understand alternative foundation systems and their detailing logic.

WEEK 18 — Raft & Wide Strip Foundations (Continued)
Recommended Timeframe ⏱ 4–5 days Learning Objective: By the end of this module you should be able to understand alternative foundation systems and their detailing logic.

WEEK 19 — Slab Raft & Steel Template
Recommended Timeframe ⏱ 5–6 days Learning Objective By the end of this module you should be able to adapt STB workflow to complex structural systems.